blogger-35.png     twitter-bird35.png    facebook35.png

Select your Language


DS4X1WP High Isolation Water Proof DiSEqC Switch
ds4x1.jpg

DS4X1WP

Highest quality DiSEqC switch available.

* DiSEqC 2.0 Protocol
* Satellite Inputs selected by DiSEqC commands
* Ultra Sleek & Slim design
* Excellent Performance
* Excellent Isolation
* Waterproof guaranteed

Frequency: 950 ~ 1450 MHz
Operating Voltage: 10-21 VDC
Operating Temp: -34°C ~ 60°C
Isolation: 20dB Min.
Impedance: 75Ω
Through Loss: 3dB Max.
DS322 Dual 2x1 DiSEqC Switch

2x1dual-150[1].pngRoHS-100[1].jpgThis new DiSEqC switch allows the user to connect 2 satellite receivers to 2 satellite dishes using twin LNBFs and the new DS322 Dual 2x1 DiSEqC switch.  This switch allows the user to watch either satellite on either receiver at any time.

This is something that we've needed for a long time.  It's always been a problem to connect 2 receivers to a system using 2 dishes aimed a different satellites.  Now you can do it with one device, the DS322.  Less in line devices, less coax jumpers and less F connectors to deal with.

Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch.

~Private label and OEM available~

Diagram

8x1 DiSEqC Switch

8x1-150[1].pngRoHS-100[1].jpgDiSEqC switches is one of the greatest things that's happened to satellite.  But sometimes there is a need to connect more than 2 dishes or 4 dishes.  Now you can connect up to 8 dishes or LNBFs on one device.  

So, for you guys that have real dish farms, this is for you.  Use this switch to connect up to 8 LNBFs.  If that isn't enough for you, use two 8x1 DiSEqC switches and one of our 22KHz switches to switch between the two 8x1 DiSEqC switches.  Now you've got up to 16 LNBFs connected to one receiver.  

Isolation: 30dB   Insertion Loss: 3dB

Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch.

~Private label and OEM available~

Diagram

4x1 DiSEqC with weather cover

wp4x1-150[1].pngRoHS-100[1].jpgNow you can protect your switch and the connections from the weather.  When mounted correctly, this switch cover provides excellent protection against rain, snow and general moisture.  

This type of switch and enclosure is highly recommended in areas where moisture is a problem.  

Protect your investment with our weather covered switches.

 DMS International DiSEqC switches have been the standard in North America for years.  

Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch.

~Private label and OEM available~

4x1 DiSEqC Switch

4x1-150[1].pngRoHS-100[1].jpgConnect up to four LNBFs (or dishes) to your receiver using our 4x1 DiSEqC switch.  

DMS International DiSEqC switches have been the standard in North America for years.  

Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch.

~Private label and OEM available~

2x1 DiSEqC Switch with weather cover

wp2x1-150[1].pngRoHS-100[1].jpgNow you can protect your switch and the connections from the weather.  When mounted correctly, this switch cover provides excellent protection against rain, snow and general moisture.  

This type of switch and enclosure is highly recommended in areas where moisture is a problem.  

Protect your investment with our weather covered switches.

DMS International DiSEqC switches have been the standard in North America for years.  

Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch.

~Private label and OEM available~

2x1 DiSEqC Switch

2x1-150[1].pngRoHS-100[1].jpgConnect up to two LNBFs (or dishes) to your receiver using our 2x1 DiSEqC switch.  

DMS International DiSEqC switches have been the standard in North America for years.  

Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch.

~Private label and OEM available~

SAM-3801 3x8 Multi-Switch

3x8-150[1].pngRoHS-100[1].jpgThis switch allows you to connect up to 8 receivers to your dish.  All receivers are able to choose any channel on any polarity at any time.  Requires using a twin (dual) LNBF like the JSC322 to provide both vertical and horizontal to the switch.  You only need to run one coax from the switch to each receiver.

~Private label and OEM available~

SAM-3401 3x4 Multi-Switch

3x4-150[1].pngRoHS-100[1].jpgThis switch allows you to connect up to 4 receivers to your dish.  All receivers are able to choose any channel on any polarity at any time.  Requires using a twin (dual) LNBF like the JSC322 to provide both vertical and horizontal to the switch.  You only need to run one coax from the switch to each receiver.

~Private label and OEM available~

Diagram

Diplexers

diplexer-150[1].pngRoHS-100[1].jpgSometimes called a signal mixer, this device allows you to combine off-air and satellite signals.  By using two of these Diplexers you can combine the off-air signal with the satellite signal and run it down one coax and in to the house.  At the receiver you will need to use the second Diplexer to split out the two signals so you may connect the signals to your satellite receiver.  When properly connected, putting the satellite receiver in standby will automatically switch the television input to the off-air antenna.  Switching the satellite receiver on will switch the television input to the satellite reception. 

~Private label and OEM available

SW-21K 22 KHz Switch

22khz-150[1].pngRoHS-100[1].jpg22KHz switch made to work with any receiver that has the 22KHz switching option.  All FTA receivers that we know about have this option.  Can be used as a simple A/B switch to switch between two LNBFs or other devices.  For instance, you can use it to switch between two 8x1 DiSEqC switches giving you the ability to use up to 16 LNBFs.

~Private label and OEM available~