VBox 7 is now available for shipping.  New features are a heavy duty power supply, more stable operation due to redesigned anti-noise circuitry and a new look.

"Q" operating software - March 4, 2010

Upgrade to the satellite/transponder database.
This upgrade is only to add a more recent satellite/transponder list inside your receiver. If you have your own list there is no need to install this upgrade. This upgrade will erase any saved information in your receiver.
http://dmsiusa.com/dbs3500software.html

First Strike FS1 meter is now Groundhog approved.  

This prestigious honor was bestowed on the FS1 by Billy Bob Hog (seen in the picture).  Known to his close friends as BB, Mr.  Hog held a short ceremony to commemorate this event and then quickly retreated to his home where he will stay in seclusion for a few days.  

Tim Heinrichs (CEO of First Strike Meters) was heard to say, "I am sure that this approval by the Groundhog community will catapult the FS1 to new heights".

If you have always wanted a professional satellite finder meter but didn't want to pay the "BIG BUCKS", this is the meter for you.  First Strike Meters are made for the professional but are easy for the Novice to understand and use.  No more searching through complicated menus to find the setting you need to change.  All parameters show on one screen making it easy for the user to modify any setting.  

Don't let the price fool you, the FS1 First Strike satellite finder meter will give you all the signal measurements that you need to install or re-align your satellite dish at a price you can afford.

FS1 quickly and easily finds even weak signals.  Unlike the competitors meters, you can do a sweep of the dish to find the signal.  

Uses the same type display screen as cell phones so it can be read in direct sunlight.  Display screen has a switchable back light so your meter can be used in low light conditions.

FS1 has a Global Data Bank that holds all the satellites in a separate data bank.  The meter also has a User Defined Data Bank that stores 100 satellites.  Entries in the Global Data Bank can be copied to the User Defined Data Bank and then easily edited to fit your needs.  The user can define new entries from the keypad.  

Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.

Rechargeable Li-on battery lasts approximately 3.5 hours on a full charge.  If the battery runs low during use, you can loop the satellite receiver through the meter and power the meter from the satellite receiver power supply.  Meter housing has a battery door for easy access and replacement of the battery.  Comes with a "Ruff Neck" protective jacket to protect your meter on the job.

Universal charger operates on 120vac/60Hz or 220vac/50Hz making it usable anywhere.  Easy change power plug.
Contact your Authorized DMS Reseller for more information.

Digital HQ Universal Ku Single LNBF with 0.1 dB noise figure and 40mm throat easily installs on your dish. Replace your existing LNBF with this Elite performer for a more stable picture and possibly more channels than you are getting now.  

Easy to install on dishes with 40mm clamps.  Very small compact design using the most recent advanced technology.  High stability makes it great for HDTV DVB-S2.  Extremely low power consumption.  100% water leak proof.  
Contact your Authorized DMS Reseller for more information.

DMS International introduces EasyFind Digital Technology, revolutionary way of installing a FTA satellite system.  

Have you ever wanted to buy a satellite dish for the free channels but didn't want to pay a big price for installation?  Do you really need a installer?  Are you able to install the system yourself?  Do you know what is involved?  

Now there is a revolutionary new system, the Easy Signal Finder System!  With the Easy Signal Finder System, you don't need an installer, and you won't spend countless hours reading poorly written instructions or trying to find the satellite you want.  Armed with a few hand tools for quick assembly, a compass (and some common sense), you can align this system within 10 minutes!  You can end all your frustration of dish alignment by using the Easy Signal Finder patented technology that comes exclusively with our receivers!

EasyFind Technology uses special micro-chips, one in the receiver and one in the LNBF.  These chips "talk" to each other relaying signal information which shows up as color and flash speed of the LED on the LNBF.  When the LED is flashing red it means no signal.  As you move your dish and get close to the satellite you want, the LED will turn to flashing yellow indicating that a signal is present.  The faster the LED flashes, the stronger the signal is.  Continue to align your dish until the LED turns a steady green.  This means the receiver has locked on to the signal.  Easy Signal Finder System determines which satellite channel you are looking for by the settings in the receiver.  For more information take a look at EasySignalFinder.com.  See our EasyFind Video.

See our Press Release here.