Using a
2
LNBF Bracket,
second LNBF, and
2x1
DiSEqC switch allows you to get both
AMC 4 and
Galaxy 25
at the same time.
Click each photo to enlarge it.
Use the pictures to understand how we installed the second LNBF.
The LNBF that is mounted on the LNBF support arm is pointing to
AMC 4 and
the additional LNBF that was added is pointing to
Galaxy 25.
We show excellent results mounting this way. Using a
2x1
DiSEqC switch allows for only one cable run to the satellite
receiver.
Please note that this
installation requires some experience. Click the pictures
above to see how we positioned the second LNBF. We first aligned
the dish to AMC 4 using the LNBF on the dishes LNBF support arm. Then
we installed the second LNBF and aligned the
LNBF only for Galaxy
25. You'll notice that the LNBFs seem to be over lapping a little.
That's because the satellites are only four degrees apart.
Pay close attention to the angle of the second LNBF.
